Home » Leak Detecting Guides » DIY Guide To Detecting And Repairing Water Leaks

DIY Guide To Detecting And Repairing Water Leaks

Water leaks often start off small and barely detectable but can quickly escalate into a big and costly problem. To save you time and money, it’s vital to know what to look for when you suspect a water leak so you can protect your home and your pocket.

How to Check for a Leak at Home


  1. Stop the use of water altogether by closing every tap on the property. Don’t flush any toilets.
  2. Check your water meter and make a note of the reading.
  3. Wait 20 minutes and take another reading. While you wait, make sure nobody flushes a toilet or opens a tap.
  4. If the second reading is different from the first, you have a leak to fix. Take action quickly and get in touch with reputable leak detectors in Cape Town – Western Cape.


How to Repair a Leak at Home

Dripping Tap

If your tap is dripping, do an inspection to determine the cause. Through the stopcock or an isolator valve, switch off the water supply. Open up the tap and inspect the washer. If it is damaged, you might need to replace it. Alternatively, cleaning any debris build-up might just clear up the leak.



Toilet leaks could be due to damage to the float and ballcock. In which case, the water will cause an overflow and continue to fill up the cistern. If this is the case, we suggest you call a plumber right away. Another reason for a toilet leak can be a crack in the bowl. This can cause a significant amount of water to leak out. The toilet would need to be replaced completely if this is the case.


Plastic Water Pipe

Again, it’s wise to turn off the water supply. Do an inspection to make sure you know exactly where the leak is coming from. Once you’ve found the culprit, replace the affected pipe. Alternatively, fix it temporarily with epoxy and tape then call a plumber.








Comments are closed.