Home » 2020 » April » 15

DIY Guide To Detecting And Repairing Water Leaks

Water leaks often start off small and barely detectable but can quickly escalate into a big and costly problem. To save you time and money, it’s vital to know what to look for when you suspect a water leak so you can protect your home and your pocket.

How to Check for a Leak at Home

 

  1. Stop the use of water altogether by closing every tap on the property. Don’t flush any toilets.
  2. Check your water meter and make a note of the reading.
  3. Wait 20 minutes and take another reading. While you wait, make sure nobody flushes a toilet or opens a tap.
  4. If the second reading is different from the first, you have a leak to fix. Take action quickly and get in touch with reputable leak detectors in Cape Town – Western Cape.

 

How to Repair a Leak at Home

Dripping Tap

If your tap is dripping, do an inspection to determine the cause. Through the stopcock or an isolator valve, switch off the water supply. Open up the tap and inspect the washer. If it is damaged, you might need to replace it. Alternatively, cleaning any debris build-up might just clear up the leak.

 

Toilet

Toilet leaks could be due to damage to the float and ballcock. In which case, the water will cause an overflow and continue to fill up the cistern. If this is the case, we suggest you call a plumber right away. Another reason for a toilet leak can be a crack in the bowl. This can cause a significant amount of water to leak out. The toilet would need to be replaced completely if this is the case.

 

Plastic Water Pipe

Again, it’s wise to turn off the water supply. Do an inspection to make sure you know exactly where the leak is coming from. Once you’ve found the culprit, replace the affected pipe. Alternatively, fix it temporarily with epoxy and tape then call a plumber.

 

 

 

 

 

 

 

How To Tile Your Bathroom: The Beginner’s Guide

Bathroom tiling isn’t something everyone feels confident about doing. However, learning the basics of tiling a bathroom doesn’t have to be daunting. Learning how to tile a bathroom can be simple as long as you make the necessary preparations. Practice makes perfect. A great start would be to follow these handy tips by professional tiling contractors in Cape Town.

 

Step 1: Clean and Prep

You need to make sure the surface is prepared properly before you can start tiling a bathroom. If not, you can’t expect professional-looking results once finished. Remove all paint, wallpaper and old adhesive and clean walls to remove any dirt and grime.

 

Step 2: Space Tiles Properly

One of the easiest ways to properly lay your tiles is to use a gauge stick. If you don’t have one, you can easily make one by using a length of wood and marking it with the size of your tiles.

 

Step 3: Start Laying Tiles on the Wall

When it’s time to lay the tiles on the wall, start at the bottom and work your way up. Place a tile against the wall and add a spacer to the side. This will help you secure tiles to the wall by leaving room for adhesive.

 

Step 4: Apply Tile Adhesive

Often tile adhesives come pre-mixed, so you won’t need to spend time mixing it yourself. You’ll need a notched trowel to apply and evenly spread the waterproof adhesive across the whole area.

 

Step 5: Mix and Apply Grout

Before you can start to grout your tiles, you’ll need to wait for the adhesive to dry thoroughly. To mix the grout, put it in a clean bucket and add water. You can add extra water to get the right consistency.

 

Start working the grout directly onto the tiles with a sponge and trowel. Wait for it to sink into the surface properly before adding more grout to the area. Let it dry completely.